Multi-Display Products
Datapath Fx4
Advancements in digital signage requirements mean that customers demand greater freedom in creating and deploying small, medium and large scale signage projects. The Datapath Fx4 is a multi-faceted stand alone display controller that supports a choice of inputs, high bandwidth loop-through as well as 4 genlocked outputs in either DisplayPort or HDMI.
The Fx4 features a DisplayPort1.2 main input alongside two HDMI1.4 inputs offering 4k 4096x2160p at 60 fps or UHD 2160p at 30 fps respectively. The intuitive user interface allows users to determine which input is used. Each output monitor can take its input from any region of the input image as all of the required cropping, scaling, rotation and frame-rate conversion is handled by the Datapath Fx4 hardware. These regions can overlap to allow any output to replicate another or can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements with uneven gaps, as well as any mix of monitor orientations. As an example, high quality down-scaling allows the display of a 4k source on a single output, while other outputs can crop and upscale to create an almost unlimited multi-screen canvas.
Network Connectivity
The Datapath Fx4 has dual ethernet ports to allow users to add the device to their networks. Only one Datapath Fx4 in the chain requires connection to the physical LAN as ethernet loop through is supported on the second port, meaning multiple devices can be connected.
Wall Designer
Datapath’s hugely popular multiscreen design tool, Wall Designer has also been updated to incorporate Fx4. Wall Designer allows users to add displays from the ever expanding database of monitors, visualise their content by adding inputs and adjusting display regions and finally instantly program all Datapath Fx4s either via USB or the network ports.
Fx4-HDR
The Datapath Fx4-HDR builds on the success of its award winning Fx4 and x4 predecessors and brings the superb HDR 10-bit colour clarity, 4K60 resolution as well as audio support into the mix. Supporting a choice of HDMI 2.0 and two additional 1.4 inputs, the Fx4-HDRis fully HDCP2.2 capable and supports a high bandwidth loop-through for daisy-chaining multiple devices and creating large video walls.
- Infinite creative configurations
- Multiple inputs for flexible connectivity: 1 x HDMI 2.0 with HDCP2.2 support 2 x HDMI 1.4 with HDCP1.4 support
- Full 10-bit data pipeline with HDR10 (ST2084) and HLG (Hybrid Log Gamma) support
- Four independent outputs up to 1920 x 1200 at 60Hz
- High bandwidth loop-through for daisy-chaining multiple units Audio passthrough, configurable to any single or multiple outputs Rotate, scale, crop, mirror and bezel correction processing
- Content region selection for each output with upscaling and downscaling support True stand-alone operation: Fx4-HDR can adapt to changes in inputs by adjusting all scale factors
- Network or USB interfaces allow platform independent control (MAC OSX 10.6 & later) Pre-load an image for use when signal is not detected
NETWORK CONNECTIVITY
The Datapath Fx4-HDR has dual Ethernet ports to allow users to add the device to their networks. Only one device in the chain requires connection to the physical LAN as Ethernet loop-through is supported on the second port, meaning multiple devices can be connected.
WALL DESIGNER
Datapath’s hugely popular multi-screen design tool, Wall Designer has also been updated to incorporate Fx4-HDR. Wall Designer allows users to add displays from the ever-expanding database of monitors, visualise their content by adding inputs and adjusting display regions and finally instantly program all devices either via USB or the network ports.
Datapath Fx4-SDI
The Datapath Fx4-SDI offers the perfect solution for staging and televised video walls. Delivering four SDI outputs and the ability to loop multiple units together, even the largest, most complex video wall installations are possible. Datapath's intuitive Wall Designer software and fully features API means that whole projects can be quickly set up and easy to manage.
Next generation display wall controller Live events and broadcast markets face similar challenges when deploying video walls. Fast transmission speeds are paramount to project success, with large distances needing to be covered by vast networks of cables. The Datapath Fx4-SDI offers the perfect solution for staging and televised video walls. Delivering four SDI outputs and the ability to loop multiple units together, even the largest, most complex video wall installations are possible. Datapath's intuitive Wall Designer software and fully features API means that whole projects can be quickly set up and easy to manage. A choice of 3G-SDI, DisplayPort1.2 and HDMI1.4 inputs, the Datapath Fx4-SDI offers up to 4k 4096 x 2160 p at 60 fps.
Network Connectivity
The Datapath Fx4-SDI has dual ethernet ports to allow users to add the device to their networks. Only one Datapath Fx4-SDI in the chain requires connection to the physical LAN as ethernet loop through is supported on the second port, meaning multiple devices can be connected.
Wall Designer
Datapath’s hugely popular multiscreen design tool, Wall Designer has also been updated to incorporate the Datapath Fx4-SDI. Wall Designer allows users to add displays from the ever expanding database of monitors, visualise their content by adding inputs and adjusting display regions and finally instantly program all Datapath Fx4-SDIs either via USB or the network ports.
Datapath Hx4
The Datapath Hx4 is a stand-alone display wall controller with the capacity to run a single 4K HDMI source across four HD outputs in ultra-high definition. When used with the powerful Wall Designer application software, the Hx4 can represent any arrangement or configuration of the source image desired. A popular choice for advertising boards, corporate signage and live event visuals, this cost-effective control system is both simple to set up and easy to use.
Features
- Infinite creative configurations
- One HDMI1.4 input (4K30), four HDMI 1.3 (HD)outputs.
- Rotate, crop, upscale, mirror and bezel correction.
- HDCP support.
- Gen lock and frame lock for tear-free display.
- True stand-alone operation: adapts to changes insource resolution by auto adjusting scale factors.
- Network or USB interfaces allow platform-independent control (Windows & MAC OS X 10.6 or later)
Additional Features
Each output monitor can take its input from any region of the input image, since all of the required cropping, scaling, rotation and frame-rate conversion is handled by the Hx4 hardware. These regions can overlap, allowing any output to replicate another, or they can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements, as well as any mix of monitor orientations– allowing users to create an unlimited, multi-monitor display canvas.
Network Connectivity
The Datapath Hx4 has a single ethernet connection, which can be used for status monitoring and complete control of the hardware. A flexible REST API is also supported to allow third-party software integration.
Wall Designer
Datapath’s hugely popular multi-screen design tool has been updated to incorporate Hx4. Wall Designer allows users to add displays from the ever-expanding database of monitors, visualize their content by adding inputs and adjusting display regions, and then instantly program all units’ Hx4s either via USB or the network ports.
Wall Designer Software
Multi-screen Display Wall installations can be challenging to design, build, configure and implement. Highly creative display projects often require multiple monitors arranged in unconventional formations with a myriad of bezel sizes, gaps and monitor positions. Project designers, installers and integrators require simple yet effect video wall creation tools in order to manage the project from start to finish.
Datapath's Wall Designer is the perfect solution to creating and managing an entire video wall project. Created to work seamlessly with Datapath's x4 Multi-Display Controller, Wall Designer allows project builders to select their monitors by manufacturer/model and arrange & orientate them onto a canvas. Select the required source and resolution and finally add a range of x4s ready for auto-configuration.
Monitor Arrangement Datapath's Wall Designer software includes a community driven monitor database. A range of monitors from popular manufacturers are included at launch and the list increase over time as users add their own monitors and submit back to Datapath. Information such as screen dimensions (in pixels & millimeters), bezel sizes and refresh rates are all included. Datapath will provide regular updates and users can add their own monitor information and submit back to the master database for inclusion in the next update.
Monitor Arrangement Datapath's Wall Designer software includes a community driven monitor database. A range of monitors from popular manufacturers are included at launch and the list increase over time as users add their own monitors and submit back to Datapath. Information such as screen dimensions (in pixels & millimeters), bezel sizes and refresh rates are all included. Datapath will provide regular updates and users can add their own monitor information and submit back to the master database for inclusion in the next update.
- Select the monitor required or add a new one.
- Select single or multiple monitors via the mini canvas and then add them to the project.
- Mix and match monitors from different manufacturers to suit the project.
- Align and rotate each monitor to place it perfectly onto the main canvas.
Add content into your Wall Designer project and place it across the virtual canvas filling the monitors with rich content. Adjust the input resolution to ensure the project matches the real content. Automatically arrange the capture regions or adjust each region to suit.
Build Diagram
Print out the design schematics which include useful measurements to aid in project build and installation. Figures are available in millimeters or inches and monitor orientations are provided.
Configure Datapath x4 Display Controllers
Automatically add x4s to your project and assign each output to a monitor. Re-draw output/monitor assignments to suit the project's needs and help installation builders. Wall Designer will advise if the project exceeds video bandwidth limits and will display a Datapath dL8 if one is required. Connect a number of x4s to your PC or Laptop and Wall Designer will allow you to assign the x4s to monitors and program them. Full monitor EDID management available for timing adjustments.
System Requirements
Wall Designer is available for Windows Vista (SP2), Windows 7 (SP1), Windows 8, or Windows 8.1. Wall Designer requires Internet Explorer 10 or better.
Languages
Wall Designer software is now available in: German, Spanish, French, Japanese, Polish, Portuguese, Russian and Simplified Chinese. (From Version 1.2.0 onwards)
Video Controller VSN Chassis
VSN400 Wall Controller
The Datapath VSN400, a video wall controller that has been designed for video wall and multi-screen display installations that require a balanced number of HD video captures and HD video outputs. The VSN400 has been developed and optimised to operate with the latest generation of our world leading PCI Express graphics and video capture cards providing flexible solutions throughout the professional AV industry.
Flexible Video Wall Control The VSN400 uses a COTS motherboard to provide flexibility and suitability for the smaller, more compact, video wall project. It comes complete with four high-performance PCI Express Gen3 expansion slots. Each x16 mechanical slot has been configured for x8 electrical performance giving up to 8GB/s bi-directional bandwidth. Compatible with all of the Datapath portfolio of Vision capture cards and Image Graphics cards, the VSN400 can provide up to 16 HD outputs or 16 HD/ 32 SD inputs or a combination of the two. Combine two ImageDP4+ graphics cards and two VisionSC-HD4+ capture cards to provide eight HD outputs and eight HD inputs. The VSN400 is provided in a standard configuration with upgrade options available for processor, memory, storage and power supply.
Multi-Application Chassis The VSN400 has been designed for small to medium sized video walls and is ideal for applications such as:
- Traffic Management Hubs
- Operation Centres
- Security Suites
- Utility Services Operations
- Process Control Service
Compatibility Datapath's VSN400 is compatible with Datapath's WallControl 10 software. WallControl 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates. Quant is a video wall compatible collaboration software, allowing users to share numerous application windows with other peers within a group, including those running video walls.
VSN972 Wall Controller
Part of the VSN 9 Series, the VSN972 wall controller is designed for environments that demand high performance and reliability. The VSN972 has 16GB memory as standard with an optional upgrade to 32GB and runs on the Intel Core i7 processor. The latest model offers improved design with the VSN 9 Series systems running cooler and quieter than the previous models.
Advanced Graphics Display Technology
2nd generation of nine slot video wall controllers for environments that demand high performance and reliability. The VSN 9 Series solutions for mission control rooms, military installations, logistic operations, security suites and many other command and control applications. The VSN range has been developed to support Datapath’s world class Vision capture, Image graphics and ActiveSQX decoding cards. This allows physical and IP video sources to be displayed medium and large scale video walls. Operators have the freedom to see any source on or multiple screen layouts. Each system in the range of 2nd generation VSNs is available with Windows 10 to ensure the highest performance available.Added Features The VSN range of industrial PCs includes a nine slot PCIe backplane. The switched fabric technology provides high bandwidth Gen3 PCIe slots. Each slot is capable of delivering high resolution bandwidth from a range of capture cards to multiple outputs. The systems contain a 7th generation Intel® Corei7. Systems are available with either 240GB or 480GB SSD drives and up to 32GB of memory. In order to maximise airflow, the 4U chassis has been custom designed to allow more air into the system. This keeps temperatures low and reduces fan noise. The VSN972 is compatible with Datapath's WallControl 10 software. 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates.
Reliability VSN video wall controllers have been designed for use in demanding control room environments. Each component has been rigorously tested to ensure high levels of performance and reliability. For added peace of mind, systems can be pre-installed with Wall Monitor software. Wall Monitor is an application that warns operators if a system begins to function outside of normal parameters. Alarms can be set to indicate changes in voltage and temperature. The VSN 972 allows users to closely monitor system temperatures and be alerted should a system temperature critical levels. The ability to create custom alerts means users can ensure operational system temperatures in a variety of environments.
VSN982 Wall Controller
The VSN 9 series systems have been redesigned to provide users with more memory, the latest processors and enhanced performance. The VSN982 has 32GB memory as standard and runs on the Intel E3 Xeon processor. The latest models in the VSN 9 Series have been designed for environments that demand high performance and reliability and run cooler and quieter than the previous models.
Advanced Graphics Display Technology
2nd generation of nine slot video wall controllers for environments that demand high performance and reliability. The VSN 9 Series solutions for mission control rooms, military installations, logistic operations, security suites and many other command and control applications. The VSN range has been developed to support Datapath’s world class Vision capture, Image graphics and ActiveSQX decoding cards. This allows physical and IP video sources to be displayed medium and large scale video walls. Operators have the freedom to see any source on or multiple screen layouts. Each system in the range of 2nd generation VSNs is available with Windows 10 to ensure the highest performance available.Added Features The VSN range of industrial PCs includes a nine slot PCIe backplane. The switched fabric technology provides high bandwidth Gen3 PCIe slots. Each slot is capable of delivering high resolution bandwidth from a range of capture cards to multiple outputs. The systems contain a 7th generation Intel E3 Xeon. Systems are available with either 240GB or 480GB SSD drives and 32GB of memory. In order to maximise airflow, the 4U chassis has been custom designed to allow more air into the system. This keeps temperatures low and reduces fan noise. The VSN982 is compatible with Datapath's WallControl 10 software. 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates.
Reliability VSN video wall controllers have been designed for use in demanding control room environments. Each component has been rigorously tested to ensure high levels of performance and reliability. For added peace of mind, systems can be pre-installed with Wall Monitor software. Wall Monitor is an application that warns operators if a system begins to function outside of normal parameters. Alarms can be set to indicate changes in voltage and temperature. The VSN 982 allows users to closely monitor system temperatures and be alerted should a system temperature critical levels. The ability to create custom alerts means users can ensure operational system temperatures in a variety of environments.
VSN1172 Wall Controller
Datapath's VSN11 Series is designed for environments that demand high performance and reliability with the latest models providing users with more memory, the latest processors and enhanced performance. The VSN1172 has 16GB memory as standard, with the option to upgrade to 32GB and runs on a Intel Core i7 processor.
High Performance Intel® Core i7 Processing The VSN range of industrial PCs 11 slot PCIe backplane. The switched fabric technology provides high bandwidth Gen3 PCIe slots. Each slot is capable of delivering high resolution bandwidth from a range of capture cards to multiple outputs. The systems contain either 7th generation Intel® Corei7 processors. Systems are available with either 240GB or 480GB SSD drives and up to 32GB of memory. In order to maximise airflow, the 4U chassis has been custom designed to allow more air into the system. This keeps temperatures low and reduces fan noise.
Software Features The VSN1172 is compatible with Datapath's WallControl 10 software. 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates. The VSN1172 is also compatible with video wall collaboration software, allowing users to share numerous application windows with other peers within a group, including those running video walls.
Reliability VSN video wall controllers have been designed for use in demanding control room environments. Each component has been rigorously tested to ensure high levels of performance and reliability. For added peace of mind, systems can be pre-installed with Wall Monitor software. Wall Monitor is an application that warns operators if a system begins to function outside of normal parameters. Alarms can be set to indicate changes in voltage and temperature. Wall Monitor allows users to closely monitor system temperatures and be alerted should a system temperature critical levels. The ability to create custom alerts means users can ensure operational system temperatures in a variety of environments.
VSN1182 Wall Controller
Part of the redesigned VSN 11 Series, the VSN1182 runs on a Intel E3 Xeon processor with 32GB memory as standard and provides users with enhanced performance and reliability. The improved design allow the systems to run cooler and quieter than previous models. Each system in the range of VSNs is available with Windows® 10 to ensure the highest performance available.
High Performance Intel® E3 Xeon Processing
The VSN range of industrial PCs 11 slot PCIe backplane. The switched fabric technology provides high bandwidth Gen3 PCIe slots. Each slot is capable of delivering high resolution bandwidth from a range of capture cards to multiple outputs.
The systems contain 7th generation Intel E3 Xeon processors. In order to maximise airflow, the 4U chassis has been custom designed to allow more air into the system. This keeps temperatures low and reduces fan noise. Systems are available with either 240GB or 480GB SSD drives and 32GB of memory as standard.
Software Features
The VSN1182 is compatible with Datapath's WallControl 10 software. 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals.
Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates.
The VSN1182 is also compatible with video wall collaboration software, allowing users to share numerous application windows with other peers within a group, including those running video walls.
Reliability
VSN video wall controllers have been designed for use in demanding control room environments. Each component has been rigorously tested to ensure high levels of performance and reliability. For added peace of mind, systems can be pre-installed with Wall Monitor software.
Wall Monitor is an application that warns operators if a system begins to function outside of normal parameters. Alarms can be set to indicate changes in voltage and temperature.
Wall Monitor allows users to closely monitor system temperatures and be alerted should a system temperature critical levels. The ability to create custom alerts means users can ensure operational system temperatures in a variety of environments.
VSN1192 Wall Controller
The VSN1192 is the most powerful video wall processor available to the market, equipped with a dual Intel® E5 processor to provide unparalleled power with the proven reliability of Datapath’s VSN series. The VSN series systems provide solutions for mission control rooms, defence installations, logistic operations, security suites and many other command and control applications. The VSN range has been developed to support Datapath’s world class Vision capture, Image graphics and ActiveSQX decoding cards. This allows physical and IP video sources to be displayed on medium and large scale video walls. Operators have the freedom to see any source on single screen or multiple screen layouts. Each system in the range of VSNs is available with Windows® 10 to ensure the highest performance available
Intel® Xeon Processing Incorporating an 11 slot PCIe backplane the VSN1192 is an industrial video wall processor. The switched fabric technology provides high bandwidth Gen3 PCIe slots. Each slot is capable of delivering high resolution bandwidth from a range of capture cards to multiple outputs. The system contains dual E5 Xeon processors and is available with either 240GB or 480GB SSD drives and up to 128GB of memory. In order to maximise airflow, the 4U chassis has been custom designed to allow more air into the system. This keeps temperatures low and reduces fan noise.
Added Features The VCN1192 is compatible with Datapath's WallControl 10 software. 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals.. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates
Reliability VSN video wall controllers have been designed for use in demanding control room environments. Each component has been rigorously tested to ensure high levels of performance and reliability. For added peace of mind, systems can be pre-installed with Wall Monitor software. Wall Monitor is an application that warns operators if a system begins to function outside of normal parameters. Alarms can be set to indicate changes in voltage and temperature.
Micro Chassis
VSNMicro 600 Wall Controller
The VSNMicro 600 platform is fully customisable with options available for different Intel processors, hard drive sizes and specifications, memory configurations and software choices. The system has a small footprint and has been designed to be very quiet for deployment in areas that would not support a standard sized wall controller chassis.
Customisation Options
VSNMicro 600 is available with a range of options including a high performance industrial grade motherboard, Intel processors, DDR4, memory and ATX or RSPU power supplies.
Datapath's range of half length cards are suitable for using within the VSNMicro 600¹
Datapath have defined a standard configuration however customers are invited to order upgrades to their systems to increase processor performance, on board memory and the size and number of solid state hard drives within the system.
For further details please contact your Datapath sales respresentative.
WallControl 10 Datapath's VSNMicro 600 system is compatible with Datapath's WallControl 10 software. WallControl 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at anytime and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates. * * Multiwall and User Rights Management are only available with WallControl 10 PRO ¹ The following cards are suitable for use within the VSNMicro 600: ImageDP4, VisionSC-DP2, VisionSC-HD4+, VisionSD8, VisionAV-HD and ActiveSQX.
WallControl 10 Datapath's VSNMicro 600 system is compatible with Datapath's WallControl 10 software. WallControl 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at anytime and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals. Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates. * * Multiwall and User Rights Management are only available with WallControl 10 PRO ¹ The following cards are suitable for use within the VSNMicro 600: ImageDP4, VisionSC-DP2, VisionSC-HD4+, VisionSD8, VisionAV-HD and ActiveSQX.
iolite Controller
iolite 600 Controller
The ability to install multiple screens and drive them from a single, simple unit has become central to businesses wanting enhanced conferencing and presentation facilities. In turn reception areas require both space for video centric informational resources, news feeds and traditional signage delivering corporate messaging in a variety of ways.
Fully featured WallControl 10
Datapath's iolite600 system is compatible with Datapath's WallControl 10 software. WallControl 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals.
Administrators of WallControl 10 are able to configure a single system to drive multiple walls. Each of these walls can be assigned a number of user roles, and each user role can allow different access to sources, local videos, layouts and templates. *
* Multiwall and User Rights Management are only available with WallControl 10 PRO
iolite 12i Controller
The ability to drive multiple screens from a single, simple controller is a key requirement for businesses wanting the ability to display video, news feeds, corporate messaging and traditional signage in their reception areas, as well as enhancing their conferencing and presentation facilities.
Combined with a high performance Windows system, the iolite 12i can drive multiple screens simultaneously, delivering video captured from a range of sources including media players, television set top boxes, IP cameras and online or local media. The iolite 12i is available as standard with an Intel Corei5 processor, 128GB SSD hard drive and 8GB RAM. Upgrade options are available to allow the inclusion of additional, high capacity HDD drive, increased memory (up to 16GB) and Intel Corei7 processor.
Datapath's iolite 12i system is compatible with Datapath's WallControl 10 software. WallControl 10 allows users to quickly and easily place video sources anywhere on the video wall. Common arrangements can be saved as layouts for recall at any time and any section of the wall can contain "carousels" of videos playing one after the other at definable intervals.
Controller Software
WallControl 10 Standard
WallControl 10 software provides users with the interface needed to quickly and effectively manage video walls of any size in real-time.
- Create templates and produce zones on your video wall for easy placement of content.
- Deploy templates over a single screen, multiple screens or an entire video wall.
- Template a window to group multiple pieces of content together.
- Select and crop particular areas of interest from a snapshot of your source and deploy them to the video wall.
- Decode up to 8 IP streams.
- Manipulate sources with full keyboard and mouse functionality (KVM).
- Place text over windows to name and identify video wall sources quickly.
- Use borders and frames to surround content with a chosen colour to group source types or prioritise content.
WallControl 10 Pro
WallControl 10 Pro edition has been designed for companies with larger scale video wall operations. It is ideal for installations, which have multiple video walls, which require a greater number of IP decode streams, or would like distinct levels of access to the video wall.
- MultiWall – Multiple walls can be viewed on a single WallControl 10 interface or screen. Users are able to add and remove content as necessary.
- User Rights Management – Users can be assigned access rights on a per wall basis. Individual roles can be granted differing permissions to affect the changes that can be made to a given wall.
- Unlimited IP SQX sources – Decode as many IP SQX streams as the installed hardware will allow.
Video Capture Cards
Vision AV Range
VisionHD4
The VisionHD4 is an eight lane PCI Express capture card with four independent video capture channels, supporting HD capture. This video capture card provides a high performance high density video capture solution for control room, medical and other applications that require high capture bandwidth. The quad HD capture capability in combination with Datapath's multi stream and synchronisation features enables resolutions up to 4096x2048 and Quad HD solutions.
The VisionHD4 captures all four HD video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside embedded HDMI audio streams can also be captured from each channel.
This full length video capture card has four capture processors, each providing 800 MB/s bandwidth.
For application case studies using this capture card:
Highway control relies on video capture and graphics technology (Malaysia)
Video capture and graphics technology riding on the Prasara Rapid Bus (Kuala Lumpur)
Vision SC Range
VisionSC-DP2
The professional AV market has begun to adopt 4k UHD technologies, with integrators and system builders demanding higher performance and greater resolutions in the video that they are working with. The Datapath VisionSC-DP2 offers video professionals the ability to simultaneously capture multiple 4k, Ultra-High Defintion, video feeds each at 60 frames per second. Developed as part of the VisionSC family of capture cards, the VisionSC-DP2 offers unmatched capture performance and reliability.
Video Streaming
DirectShow drivers for WDM Streaming supports the following applications, to encode, record and stream video over networks or the Internet:
- Microsoft Media Encoder®
- VLC
- VirtualDub
- Any other DirectShow encoding software
VisionSC-SDI4
Developed for capturing multiple High Definition SDI video signals, the VisionSC-SDI4 is the perfect solution to AV professionals looking to capture from multiple SDI sources. Ideal for use in broadcast markets or with any SDI capable applications the VisionSC-SDI4 provides four 3G-SDI inputs each capable of capturing 1920x1080p at 60 frames per second. Each capture channel is hardware timestamped allowing for larger surfaces to be captured and stitched together.
Video Streaming
DirectShow drivers for WDM Streaming supports the following applications, to encode, record and stream video over networks or the Internet:
- Microsoft Media Encoder®
- VLC
- VirtualDub
- Any other DirectShow encoding software
VisionSC-HD4+
A wide range of applications demand multiple channels of video capture from a single card. Markets include advanced medical and machine vision capture, military applications and security/ surveillance systems. Suitable for these markets and others Datapath's VisionSC-HD4+ audio video capture card provides an outstanding, powerful solution for multiple HDMI or DVI video capture with support for HDCP.
The VisionSC-HD4+ has four channels of HDMI 1.4, two supporting 297MHz (3840x2160 at 30 fps) and two supporting 165 MHz (1920x1080 at 60 fps), all operating independently of each other. This enables four separate four video sources to be captured and controlled simultaneously. The card also has embedded audio support across all four channels. The VisionSC-HD4+ is shipped with adapter cables for either HDMI or DVI.
VisionSC-UHD2
From command and control rooms to reception areas, collaboration environments and digital signage applications, the VisionSC-UHD2 ensures the very best quality and ultimate customer satisfaction. Providing two HDMI 2.0 capture channels with HDCP 2.2 at 4K60p with full 4:4:4 colour sampling, the VisionSC-UHD2 compliments our hugely successful VisionSC capture card family and offers unparalleled performance in frame grabber technology.
The VisionSC-UHD2 is supported by the Datapath Vision Performance Driver. Features include: Datapath LiveStream for a single line of capture latency, MultiStream for multiple
capture instances, hardware timestamping,HDMI signal conditioning supporting longer cable runs, automatic fast & reliable mode detection, frame synchronised ganging of inputs (dual 4K into 8K x 2K), flexible onboard Colour Space Converter plus a whole lot more.
An advanced hardware scaling engine with polyphase multi-tap filter also provides superb antialiasing performance when downscaling and smoother transitions when upscaling.
Vision Range
VisionRGB-E1S
The VisionRGB-E1S has a single video capture device supporting up to 1920x1080 DVI or 2048x1536 analog resolution. The VisionRGB-E1S captures the Analog/ DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming. The VisionRGB-E1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include:
RGB Streaming The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.
Video Streaming Support Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
Software The VisionRGB-E1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.
- Viewing Analog or DVI sources from PCs, MACs, industrial or medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
RGB Streaming The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.
Video Streaming Support Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Software The VisionRGB-E1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.
VisionRGB-E2S
The VisionRGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650MB/s transfer bus bandwidth providing a further improvement to the 480 MB/s of the VisionRGB-E2. This video capture has two complete capture channels supporting up to 1920x1200 DVI or 2048x1536 Analog resolution. The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionRGB-E2S capture card transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S capture card sends the relevant portions of each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionRGB-E2S capture card is an ideal solution for applications require the capture of Analog or DVI sources in real time. Typical applications include:
Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Software The VisionRGB-E2S capture card is supplied with a powerful software application for configuring timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E2S application to automatically detect the video source format and display the captured video in a window on your desktop.
Applications The VisionRGB series is ideal for a wide range of applications including:
- Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Software The VisionRGB-E2S capture card is supplied with a powerful software application for configuring timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E2S application to automatically detect the video source format and display the captured video in a window on your desktop.
Applications The VisionRGB series is ideal for a wide range of applications including:
- Medical imaging: Capture legacy RGB modalities
- Multi display presentation software: Recommended by industry leaders Dataton WATCHOUT™
- Digital signage: Integrated by C-nario into their world class, open platform digital signage software solutions
- Machine vision: Acquire high resolution camera outputs
- Voyage data recorders: Capture radar images
- Simulation/military: Acquire high resolution video and simulation for command and control
VisionSD4+1S
The VisionSD4+1S delivers extreme performance with 650MB/s transfer bus bandwidth further improved to the 480 MB/s of the VisionSD4+1. This video capture card has five complete video capture channels supporting a single channel for up to 1920x1080 DVI or 2048x1536 Analog resolution, plus four SD Analog capture channels. The VisionSD4+1S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionSD4+1S transfers the data directly to the graphics card thereby increasing performance. The VisionSD4+1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionSD4+1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionSD4+1S is an ideal solution for applications that require the capture of an RGB/DVI source simultaneously with up to four SD video sources. Typical applications include:
RGB Streaming For streaming applications, the VisionSD4+1s can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionSD4+1s due to its built-in WDM support. Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Software The VisionSD4+1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the VisionSD4+1s application to automatically detect the video source format and display the captured video in a window on your desktop.
- Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
RGB Streaming For streaming applications, the VisionSD4+1s can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionSD4+1s due to its built-in WDM support. Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Software The VisionSD4+1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the VisionSD4+1s application to automatically detect the video source format and display the captured video in a window on your desktop.
VisionDVI-DL
The VisionDVI-DL is a single channel PCI express dual-link DVI capture card. A stand alone PCI Express four lane plug in video capture card, the VisionDVI-DL delivers extreme performance with 650 MB/s transfer bandwidth. A maximum canvas of 4kx4k allows any DVI source to be captured.
The VisionDVI-DL capture card has integrated DVI equalizers on its inputs to support longer input cable lengths (up to 20m). This video capture card is suitable for a wide range of applications including:
Software The VisionDVI-DL, dual-link DVI capture card, is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the card, run the VisionDVI-DL application to automatically detect the video source resolution and display the captured video in a window on your desktop. Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath Wall Control-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate Wall Control video wall software on a remote PC via a network connection.
Video Streaming For streaming applications, the VisionDVI-DL capture card can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionDVI-DL capture card due to its built-in WDM support.
- Large video walls
- High resolution, high bandwidth applications
- Advanced Medical and Machine Vision capture
- Radar, Security/Surveillance and Military applications
- IP Render decode capture
Software The VisionDVI-DL, dual-link DVI capture card, is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the card, run the VisionDVI-DL application to automatically detect the video source resolution and display the captured video in a window on your desktop. Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath Wall Control-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate Wall Control video wall software on a remote PC via a network connection.
Video Streaming For streaming applications, the VisionDVI-DL capture card can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionDVI-DL capture card due to its built-in WDM support.
VisionSDI2
The VisionSDI2 is a dual channel PCI Express HD-SDI video capture card. The capture card supports SD-SDI, HD-SDI and 3G-SDI (including 2k Digital Film Resolution modes). The VisionSDI2 video capture card, a stand alone PCI Express four lane plug in card, delivers extreme performance with 650MB/s transfer bus bandwidth.
This industry beating performance makes the VisionSDI2 ideal for a wide range of applications including:
Video Streaming DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Software The VisionSDI2 video capture is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the capture card, run the VisionSDI2 application to automatically detect the video source format and display the captured video in a window on your desktop.
Wall Control Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath WallControl-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate WallControl-red video wall software on a remote PC via a network connection.
- Display wall controllers
- Broadcasting
- Machine Vision: Acquire SDI camera output
- Advanced Medical applications
- The VisionSDI2 capture card is fully integrated with the Datapath family of video wall display products providing high resolution digital video support
Video Streaming DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
- For further details see the Datapath DirectShow SDK documentation supplied as part of a typical installation.
Software The VisionSDI2 video capture is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the capture card, run the VisionSDI2 application to automatically detect the video source format and display the captured video in a window on your desktop.
Wall Control Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath WallControl-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate WallControl-red video wall software on a remote PC via a network connection.
VisionSD8
The VisionSD8 is an eight channel PCI Express video capture card. The card supports PAL, NTSC and SECAM in both composite and S-video input formats. VisionSD8 video capture card supports de-interlaced video capture and display at 25 / 30 fps for real time video overlays.
The VisionSD8, a stand alone PCI Express four lane plug in capture card, delivers extreme performance with 480 MB/s transfer bus bandwidth. This industry beating performance makes the VisionSD8 ideal for a wide range of applications including:
Video Streaming Support DirectShow drivers for WDM streaming driver supports the following applications to encode, record and stream video over networks or the Internet:
Video Walls The Vision range of video capture cards are fully integrated with the Datapath family of video wall multi-display products. The VisionSD8 captures a composite or S-video output from one source and then displays it as an independent application on your video wall, this is done in real time. The VisionSD8 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.
- Multi-display presentation software: recommended by industry leaders Dataton WATCHOUT™
- Digital signage
- Machine vision: acquires high resolution camera outputs
- Voyage data recorders: capture radar images
- Simulation/ Military: acquire high resolution video and simulation for comment and control
Video Streaming Support DirectShow drivers for WDM streaming driver supports the following applications to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VirtualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Video Walls The Vision range of video capture cards are fully integrated with the Datapath family of video wall multi-display products. The VisionSD8 captures a composite or S-video output from one source and then displays it as an independent application on your video wall, this is done in real time. The VisionSD8 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.
SQX Streaming Technologies
SQX Technology
SQX is Datapath's collective name for video streaming & compression technologies. Datapath's SQX products open up a world of possibilities for video delivery, transmission and storage whilst maintaining the ability to easily scale projects from the management of a single stream to full inclusive systems that accommodate a wide array of inputs and outputs streaming from a variety of sources to a number of destinations.
SoftSQX uses the processing power of the CPU to decode IP streams. SoftSQX also includes an IP transport stack within Windows for RTSP delivery. The SQXEasy SDK is transparent to both ActiveSQX and SoftSQX. If no ActiveSQX hardware is available, or ActiveSQX resources are full to capacity, the Wall Control SQX software will ‘roll over’ to SoftSQX for decoding networked video sources when on the same domain.
ActiveSQX
Professional AV solutions require video to be recieved from a great many different sources and locations. The ability to recieve and display video directly from online resources such as CCTV networks and remote desktop applications and combining them with local inputs has become an everyday part of fully functional video wall display. Datapath's ActiveSQX PCIe plug in card is a powerful addition to systems that require a scalable hardware based decoding solution.
The ActiveSQX includes a dedicated processor capable of decoding several IP streams simultaneously via the on-board ethernet ports. Fully PCIe compatible, multiple ActiveSQX cards can be used in a single system to provide project scalability giving users more processing and more simultaneous decodes.
Datapath SQX Technologies Datapath's SQX technology is compatible with industry standards for video compression and streaming. The ActiveSQX allows users to decide large numbers of high definition 1080p 60 fps streams and multiple ActiveSQX cards reside in a single system to provide even more decoding capabilities. In addition, the ActiveSQX can be placed in systems alongside graphics cards and video capture cards, such as the Datapath Vision range, to provide a powerful addition to any control room environment. Combine the ActiveSQX with the VisionHD2-SQX to provide full decode and encode capabilities in a single video wall system.
Datapath SQX Technologies Datapath's SQX technology is compatible with industry standards for video compression and streaming. The ActiveSQX allows users to decide large numbers of high definition 1080p 60 fps streams and multiple ActiveSQX cards reside in a single system to provide even more decoding capabilities. In addition, the ActiveSQX can be placed in systems alongside graphics cards and video capture cards, such as the Datapath Vision range, to provide a powerful addition to any control room environment. Combine the ActiveSQX with the VisionHD2-SQX to provide full decode and encode capabilities in a single video wall system.
VisionHD2-SQX
Capturing and encoding video for digital streaming or storing is a key requirement for the professional AV market . Users need to be able to capture video and not only send the data to the screen but transport compressed video to online resources or to storage locations for remote access or later retrieval.
The Datapath VisionHD2-SQX is an advanced video capture card with SQX technology that allows captured video to be encoded into H.264. Featuring three independent capture channels the VisionHD2-SQX allows users to capture two high definition 1920x1200 video feeds and directly encode them into H.264 using the dedicated SQX processor.
Each encoded video can be utilized by the SQX media server for distribution over a network. In addition raw captured video can be rapidly transferred to graphics hardware or system buffers for viewing or further processing.
Datapath SQX Technologies Datapath’s SQX encoding technology uses the global H.264 standard for video compression and streaming. Multiple streams of captured video can be simultaneously encoded and streamed to different locations. The VisionHD2-SQX can capture two 1920x1200 channels, the encoding engine can encode one channel at 60 fps or both at 30 fps, allowing one stream to be broadcast over the internet and another to be stored to disk. A single stream can be distributed to any number of network locations all configured through a media server.
Datapath SQX Technologies Datapath’s SQX encoding technology uses the global H.264 standard for video compression and streaming. Multiple streams of captured video can be simultaneously encoded and streamed to different locations. The VisionHD2-SQX can capture two 1920x1200 channels, the encoding engine can encode one channel at 60 fps or both at 30 fps, allowing one stream to be broadcast over the internet and another to be stored to disk. A single stream can be distributed to any number of network locations all configured through a media server.
Vision AV Range
VisionHD4
The VisionHD4 is an eight lane PCI Express capture card with four independent video capture channels, supporting HD capture. This video capture card provides a high performance high density video capture solution for control room, medical and other applications that require high capture bandwidth. The quad HD capture capability in combination with Datapath's multi stream and synchronisation features enables resolutions up to 4096x2048 and Quad HD solutions.
The VisionHD4 captures all four HD video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside embedded HDMI audio streams can also be captured from each channel.
This full length video capture card has four capture processors, each providing 800 MB/s bandwidth.
For application case studies using this capture card:
Highway control relies on video capture and graphics technology (Malaysia)
Video capture and graphics technology riding on the Prasara Rapid Bus (Kuala Lumpur)
Vision SC Range
VisionSC-DP2
The professional AV market has begun to adopt 4k UHD technologies, with integrators and system builders demanding higher performance and greater resolutions in the video that they are working with. The Datapath VisionSC-DP2 offers video professionals the ability to simultaneously capture multiple 4k, Ultra-High Defintion, video feeds each at 60 frames per second. Developed as part of the VisionSC family of capture cards, the VisionSC-DP2 offers unmatched capture performance and reliability.
Video Streaming
DirectShow drivers for WDM Streaming supports the following applications, to encode, record and stream video over networks or the Internet:
- Microsoft Media Encoder®
- VLC
- VirtualDub
- Any other DirectShow encoding software
VisionSC-SDI4
Developed for capturing multiple High Definition SDI video signals, the VisionSC-SDI4 is the perfect solution to AV professionals looking to capture from multiple SDI sources. Ideal for use in broadcast markets or with any SDI capable applications the VisionSC-SDI4 provides four 3G-SDI inputs each capable of capturing 1920x1080p at 60 frames per second. Each capture channel is hardware timestamped allowing for larger surfaces to be captured and stitched together.
Video Streaming
DirectShow drivers for WDM Streaming supports the following applications, to encode, record and stream video over networks or the Internet:
- Microsoft Media Encoder®
- VLC
- VirtualDub
- Any other DirectShow encoding software
VisionSC-HD4+
A wide range of applications demand multiple channels of video capture from a single card. Markets include advanced medical and machine vision capture, military applications and security/ surveillance systems. Suitable for these markets and others Datapath's VisionSC-HD4+ audio video capture card provides an outstanding, powerful solution for multiple HDMI or DVI video capture with support for HDCP.
The VisionSC-HD4+ has four channels of HDMI 1.4, two supporting 297MHz (3840x2160 at 30 fps) and two supporting 165 MHz (1920x1080 at 60 fps), all operating independently of each other. This enables four separate four video sources to be captured and controlled simultaneously. The card also has embedded audio support across all four channels. The VisionSC-HD4+ is shipped with adapter cables for either HDMI or DVI.
VisionSC-UHD2
From command and control rooms to reception areas, collaboration environments and digital signage applications, the VisionSC-UHD2 ensures the very best quality and ultimate customer satisfaction. Providing two HDMI 2.0 capture channels with HDCP 2.2 at 4K60p with full 4:4:4 colour sampling, the VisionSC-UHD2 compliments our hugely successful VisionSC capture card family and offers unparalleled performance in frame grabber technology.
The VisionSC-UHD2 is supported by the Datapath Vision Performance Driver. Features include: Datapath LiveStream for a single line of capture latency, MultiStream for multiple
capture instances, hardware timestamping,HDMI signal conditioning supporting longer cable runs, automatic fast & reliable mode detection, frame synchronised ganging of inputs (dual 4K into 8K x 2K), flexible onboard Colour Space Converter plus a whole lot more.
An advanced hardware scaling engine with polyphase multi-tap filter also provides superb antialiasing performance when downscaling and smoother transitions when upscaling.
Vision Range
VisionRGB-E1S
The VisionRGB-E1S has a single video capture device supporting up to 1920x1080 DVI or 2048x1536 analog resolution. The VisionRGB-E1S captures the Analog/ DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming. The VisionRGB-E1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include:
RGB Streaming The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.
Video Streaming Support Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
Software The VisionRGB-E1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.
- Viewing Analog or DVI sources from PCs, MACs, industrial or medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
RGB Streaming The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.
Video Streaming Support Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Software The VisionRGB-E1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E1S application to automatically detect the video source format and display the captured video in a window on your desktop.
VisionRGB-E2S
The VisionRGB-E2S, a stand alone PCI Express x4 plug in capture card, delivers extreme performance with 650MB/s transfer bus bandwidth providing a further improvement to the 480 MB/s of the VisionRGB-E2. This video capture has two complete capture channels supporting up to 1920x1200 DVI or 2048x1536 Analog resolution. The VisionRGB-E2S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionRGB-E2S capture card transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E2S capture card sends the relevant portions of each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E2S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionRGB-E2S capture card is an ideal solution for applications require the capture of Analog or DVI sources in real time. Typical applications include:
Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Software The VisionRGB-E2S capture card is supplied with a powerful software application for configuring timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E2S application to automatically detect the video source format and display the captured video in a window on your desktop.
Applications The VisionRGB series is ideal for a wide range of applications including:
- Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Software The VisionRGB-E2S capture card is supplied with a powerful software application for configuring timing and format of the input sources and displaying the data. Simply connect your external DVI or Analog source into the card, run the VisionRGB-E2S application to automatically detect the video source format and display the captured video in a window on your desktop.
Applications The VisionRGB series is ideal for a wide range of applications including:
- Medical imaging: Capture legacy RGB modalities
- Multi display presentation software: Recommended by industry leaders Dataton WATCHOUT™
- Digital signage: Integrated by C-nario into their world class, open platform digital signage software solutions
- Machine vision: Acquire high resolution camera outputs
- Voyage data recorders: Capture radar images
- Simulation/military: Acquire high resolution video and simulation for command and control
VisionSD4+1S
The VisionSD4+1S delivers extreme performance with 650MB/s transfer bus bandwidth further improved to the 480 MB/s of the VisionSD4+1. This video capture card has five complete video capture channels supporting a single channel for up to 1920x1080 DVI or 2048x1536 Analog resolution, plus four SD Analog capture channels. The VisionSD4+1S captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a Datapath graphics card is used, the VisionSD4+1S transfers the data directly to the graphics card thereby increasing performance. The VisionSD4+1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionSD4+1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.
The VisionSD4+1S is an ideal solution for applications that require the capture of an RGB/DVI source simultaneously with up to four SD video sources. Typical applications include:
RGB Streaming For streaming applications, the VisionSD4+1s can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionSD4+1s due to its built-in WDM support. Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Software The VisionSD4+1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the VisionSD4+1s application to automatically detect the video source format and display the captured video in a window on your desktop.
- Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
RGB Streaming For streaming applications, the VisionSD4+1s can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionSD4+1s due to its built-in WDM support. Video Streaming Support DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Software The VisionSD4+1S video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the VisionSD4+1s application to automatically detect the video source format and display the captured video in a window on your desktop.
VisionDVI-DL
The VisionDVI-DL is a single channel PCI express dual-link DVI capture card. A stand alone PCI Express four lane plug in video capture card, the VisionDVI-DL delivers extreme performance with 650 MB/s transfer bandwidth. A maximum canvas of 4kx4k allows any DVI source to be captured.
The VisionDVI-DL capture card has integrated DVI equalizers on its inputs to support longer input cable lengths (up to 20m). This video capture card is suitable for a wide range of applications including:
Software The VisionDVI-DL, dual-link DVI capture card, is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the card, run the VisionDVI-DL application to automatically detect the video source resolution and display the captured video in a window on your desktop. Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath Wall Control-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate Wall Control video wall software on a remote PC via a network connection.
Video Streaming For streaming applications, the VisionDVI-DL capture card can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionDVI-DL capture card due to its built-in WDM support.
- Large video walls
- High resolution, high bandwidth applications
- Advanced Medical and Machine Vision capture
- Radar, Security/Surveillance and Military applications
- IP Render decode capture
Software The VisionDVI-DL, dual-link DVI capture card, is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the card, run the VisionDVI-DL application to automatically detect the video source resolution and display the captured video in a window on your desktop. Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath Wall Control-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate Wall Control video wall software on a remote PC via a network connection.
Video Streaming For streaming applications, the VisionDVI-DL capture card can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the VisionDVI-DL capture card due to its built-in WDM support.
VisionSDI2
The VisionSDI2 is a dual channel PCI Express HD-SDI video capture card. The capture card supports SD-SDI, HD-SDI and 3G-SDI (including 2k Digital Film Resolution modes). The VisionSDI2 video capture card, a stand alone PCI Express four lane plug in card, delivers extreme performance with 650MB/s transfer bus bandwidth.
This industry beating performance makes the VisionSDI2 ideal for a wide range of applications including:
Video Streaming DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Software The VisionSDI2 video capture is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the capture card, run the VisionSDI2 application to automatically detect the video source format and display the captured video in a window on your desktop.
Wall Control Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath WallControl-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate WallControl-red video wall software on a remote PC via a network connection.
- Display wall controllers
- Broadcasting
- Machine Vision: Acquire SDI camera output
- Advanced Medical applications
- The VisionSDI2 capture card is fully integrated with the Datapath family of video wall display products providing high resolution digital video support
Video Streaming DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
- For further details see the Datapath DirectShow SDK documentation supplied as part of a typical installation.
Software The VisionSDI2 video capture is supplied with a powerful software application for configuring the format of the input sources and displaying the data. Simply connect your video source into the capture card, run the VisionSDI2 application to automatically detect the video source format and display the captured video in a window on your desktop.
Wall Control Wall Control-red presents a representational window of the entire display wall showing position and size of video windows. Datapath WallControl-red video wall software enables you to configure your multi-screen display, launch video overlays and create a video wall layout configuration. With the full version it is possible to save layouts and recall them for future use and also operate WallControl-red video wall software on a remote PC via a network connection.
VisionSD8
The VisionSD8 is an eight channel PCI Express video capture card. The card supports PAL, NTSC and SECAM in both composite and S-video input formats. VisionSD8 video capture card supports de-interlaced video capture and display at 25 / 30 fps for real time video overlays.
The VisionSD8, a stand alone PCI Express four lane plug in capture card, delivers extreme performance with 480 MB/s transfer bus bandwidth. This industry beating performance makes the VisionSD8 ideal for a wide range of applications including:
Video Streaming Support DirectShow drivers for WDM streaming driver supports the following applications to encode, record and stream video over networks or the Internet:
Video Walls The Vision range of video capture cards are fully integrated with the Datapath family of video wall multi-display products. The VisionSD8 captures a composite or S-video output from one source and then displays it as an independent application on your video wall, this is done in real time. The VisionSD8 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.
- Multi-display presentation software: recommended by industry leaders Dataton WATCHOUT™
- Digital signage
- Machine vision: acquires high resolution camera outputs
- Voyage data recorders: capture radar images
- Simulation/ Military: acquire high resolution video and simulation for comment and control
Video Streaming Support DirectShow drivers for WDM streaming driver supports the following applications to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VirtualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
Video Walls The Vision range of video capture cards are fully integrated with the Datapath family of video wall multi-display products. The VisionSD8 captures a composite or S-video output from one source and then displays it as an independent application on your video wall, this is done in real time. The VisionSD8 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.
SQX Streaming Technologies
SQX Technology
SQX is Datapath's collective name for video streaming & compression technologies. Datapath's SQX products open up a world of possibilities for video delivery, transmission and storage whilst maintaining the ability to easily scale projects from the management of a single stream to full inclusive systems that accommodate a wide array of inputs and outputs streaming from a variety of sources to a number of destinations.
SoftSQX uses the processing power of the CPU to decode IP streams. SoftSQX also includes an IP transport stack within Windows for RTSP delivery. The SQXEasy SDK is transparent to both ActiveSQX and SoftSQX. If no ActiveSQX hardware is available, or ActiveSQX resources are full to capacity, the Wall Control SQX software will ‘roll over’ to SoftSQX for decoding networked video sources when on the same domain.
ActiveSQX
Professional AV solutions require video to be recieved from a great many different sources and locations. The ability to recieve and display video directly from online resources such as CCTV networks and remote desktop applications and combining them with local inputs has become an everyday part of fully functional video wall display. Datapath's ActiveSQX PCIe plug in card is a powerful addition to systems that require a scalable hardware based decoding solution.
The ActiveSQX includes a dedicated processor capable of decoding several IP streams simultaneously via the on-board ethernet ports. Fully PCIe compatible, multiple ActiveSQX cards can be used in a single system to provide project scalability giving users more processing and more simultaneous decodes.
Datapath SQX Technologies Datapath's SQX technology is compatible with industry standards for video compression and streaming. The ActiveSQX allows users to decide large numbers of high definition 1080p 60 fps streams and multiple ActiveSQX cards reside in a single system to provide even more decoding capabilities. In addition, the ActiveSQX can be placed in systems alongside graphics cards and video capture cards, such as the Datapath Vision range, to provide a powerful addition to any control room environment. Combine the ActiveSQX with the VisionHD2-SQX to provide full decode and encode capabilities in a single video wall system.
Datapath SQX Technologies Datapath's SQX technology is compatible with industry standards for video compression and streaming. The ActiveSQX allows users to decide large numbers of high definition 1080p 60 fps streams and multiple ActiveSQX cards reside in a single system to provide even more decoding capabilities. In addition, the ActiveSQX can be placed in systems alongside graphics cards and video capture cards, such as the Datapath Vision range, to provide a powerful addition to any control room environment. Combine the ActiveSQX with the VisionHD2-SQX to provide full decode and encode capabilities in a single video wall system.
VisionHD2-SQX
Capturing and encoding video for digital streaming or storing is a key requirement for the professional AV market . Users need to be able to capture video and not only send the data to the screen but transport compressed video to online resources or to storage locations for remote access or later retrieval.
The Datapath VisionHD2-SQX is an advanced video capture card with SQX technology that allows captured video to be encoded into H.264. Featuring three independent capture channels the VisionHD2-SQX allows users to capture two high definition 1920x1200 video feeds and directly encode them into H.264 using the dedicated SQX processor.
Each encoded video can be utilized by the SQX media server for distribution over a network. In addition raw captured video can be rapidly transferred to graphics hardware or system buffers for viewing or further processing.
Datapath SQX Technologies Datapath’s SQX encoding technology uses the global H.264 standard for video compression and streaming. Multiple streams of captured video can be simultaneously encoded and streamed to different locations. The VisionHD2-SQX can capture two 1920x1200 channels, the encoding engine can encode one channel at 60 fps or both at 30 fps, allowing one stream to be broadcast over the internet and another to be stored to disk. A single stream can be distributed to any number of network locations all configured through a media server.
Datapath SQX Technologies Datapath’s SQX encoding technology uses the global H.264 standard for video compression and streaming. Multiple streams of captured video can be simultaneously encoded and streamed to different locations. The VisionHD2-SQX can capture two 1920x1200 channels, the encoding engine can encode one channel at 60 fps or both at 30 fps, allowing one stream to be broadcast over the internet and another to be stored to disk. A single stream can be distributed to any number of network locations all configured through a media server.
Graphics Cards
Image Range
ImageDP4
The ImageDP4 is a high performance, four channel graphics card that provides a smooth performance upgrade path from the Datapath Image4.The ImageDP4 combines a single, powerful graphics processor with improved memory and PCI Express bandwidths to provide responsive performance at up to double the resolution of previous Datapath graphics cards.
Advanced display technology allows up to 16 ImageDP4 graphics cards to be supported by the Datapath display driver, providing a high resolution Windows® desktop comprising up to 64 screens. This ability to present standard Windows® applications alongside full frame-rate video on a single high resolution desktop allows the visualisation of large amounts of data at once to aid effective decision making. To complete the integration into a single desktop, all the outputs of the ImageDP4 graphics card are automatically frame-locked across all cards within a system.
This four channel DisplayPort graphics card is optimised for use with the Datapath range of capture cards for systems requiring video overlays from a wide range of sources and resolutions. Video windows can be positioned and sized anywhere on the multi-screen desktop, while maintaining full frame rate, true colour rendering throughout.
Combining the Vision video capture cards with an ImageDP4 graphics display allows the construction of high-end display wall systems.
The ImageDP4 card natively supports four full-sized DisplayPort outputs for the convenience of high resolution, locking cable connectors and significantly longer cable lengths. Air flow management is optimised through the use of passive cooling, providing high reliability for any multi-screen solution.
Read about applications using this card:
Highway control relies on video capture and graphics technology (Malaysia)
Video capture and graphics technology riding high on the Prasara Rapid Bus (Kuala Lumpur)
Image 4K Graphics Card
Designed for professional, multi-screen and video wall installations, the Image4K is a very powerful graphics card, enabling scalable solutions, that delivers full 4K60 4:4:4 content over four HDMI 2.0 outputs. Fully integrated with Datapath’s graphical setup wizard, the Image4K is easy to configure for different combinations of monitors, projectors, or LED controllers. Output resolution, rotation and wall layout are all easily configured using the intuitive graphical interface in a matter of minutes. When combined with Datapath 4K-capable capture cards, the Image4K enables the VSN range of video wall controllers to deliver full 4K60 video from source to screen with full support for HDCP 2.2. For video wall applications, each 4K output from the Image4K can be used to drive four HD outputs using screen loop-through (if supported by the screens) or a multi-display controller such as the Datapath Fx4. This approach delivers up to 16 HD outputs from a single Image4K card, providing a simpler, more cost-effective overall solution.
FEATURES
- Four 4K60 4:4:4 HDMI 2.0 outputs
- Enables full 4K60 capture and display in Datapath VSN controllers HDCP 2.2 supported when using Datapath capture cards
- Support for up to 6 cards in a single system with a total output of 199 Megapixels
- Fully compatible with Datapath's Display Driver Configuration Tool (DDCT) and Diagnostic Suite
SOFTWARE
Drivers
Datapath’s multi-screen display driver is engineered specifically for use with Windows 10 64-bit. The display driver unifies multiple Image4K cards to present a single desktop canvas to the Windows operating system, allowing each video wall to display hundreds of output windows with full support for picture-in-picture and overlaps. The multi-screen driver supports a maximum of 24 outputs for the Image4K (six cards).
Display Driver Configuration Tool
Our unique graphical setup tool allows users to easily configure multiple outputs to create complex video wall layouts in a matter of minutes. The tool guides users through the setup process using a simple step-bystep wizard, enabling screen dimensions, resolution and position to be configured with ease. The built-in database of monitors contains hundreds of models from various manufacturers, allowing supported resolutions and bezel measurements to be easily configured for each monitor.
Control Software
The Image4K is fully compatible with Datapath's WallControl 10 software, which provides users with the interface required to quickly and effectively manage content that can include video captures, IP streams and local applications. Users are able to place any input source on any part of the Video Wall using a simple drag and drop interface. Precise positioning of each piece of content can be achieved through the mouse and keyboard, or via the revolutionary template tool.
KVM over IP systems
Arqa KVM over IP
UNPARALLELED HARDWARE KVM
Aiding demanding command and control environments and other AV applications, Arqa gives operators access to multiple remote sources without sacrificing video quality or round-trip latency. Suitable for those who need to monitor, control and share access to multiple remote servers, Datapath’s Arqa product range supports up to 2000 endpoints contained within a single 1Gb switched video distribution network. Arqa compliments Datapath’s award winning VSN video wall controllers, which are found today in control rooms and command centres all over the world and offers an ideal control solution for systems integrators.
FEATURES
- KVM matrixing with up to 2,000 endpoints
- One Control Technology - Allows control of multiple PC’s across a single workstation with one keyboard and mouse
- Multi-head support - Sources with multiple screens can be treated ‘as one’
- Push support - Share current source with other receivers
- Pull support - Access any source direct from the receiver Flexible sharing - Remote source viewing or take control
- Hardware KVM with intra-frame compression algorithm: Visually lossless image quality, irrespective of content
- Significant latency advantage over other methods, e.g. h264, RDP, VNC, PCoIP Copper and Fiber versions (can be mixed) Simple network switch requirements
- Plug and Play installation over IP Video loop-through port for local extension into IP network
- Mass storage mode disable for securing against endpoint intrusion
PUSH AND PULL
Arqa’s Push and Pull functionality is ideal for users who require the ability to monitor, control and share multiple sources from a variety of workstations. With minimal effort each user can choose from a pool of remote sources and pull them onto their individual workstations. Once work is finished with one source, another can be quickly switched into its place, increasing working efficiency as well as facilitating a level of system redundancy. Users can monitor any source of interest that might be under the control of another user without distracting their workflow. Users granted with sufficient permissions can choose to push their source onto other workstations or onto a central video wall via a Datapath video wall controller.
ONE CONTROL
With built-in One Control, switching between multiple sources can be done with ease. Users can simply drag their cursor to the edge of their monitor and seamlessly glide through multiple sources of interest with zero latency, just as if all sources were connected locally. Up to 16 HD screens can be connected into a single virtual workstation using One Control to switch between sources and applications.
ARQA NETWORK MANAGER
Network Manager is a Windows-based application required for managing Arqa network distributed systems. Built with ease of use in mind, the simple UI provides fast and convenient control of all Arqa devices. It handles network device discovery, device configuration, video routing, sharing configurations as well as administrator settings. Network Manager also offers a User Rights Management facility which restricts users to accessing only endpoints within the system, all under the control of a system administrator. Once enabled, users must log on to a workstation with their account before gaining access to their sources or to any screens.
Extended Warranty and Support Services
Extended Warranty and Support Services
Datapath, in conjunction with Red Solutions, can offer added value services including extended warranties, on-site training, on-site commissioning and annual service visits. providing your clients with peace of mind post-purchase. Extended warranties and support services must be added to your Datapath products at the time of purchase. Cover can be provided for 3 or 5 years.
Advanced Replacement Policy Datapath offer an advanced replacement policy on its graphics cards, capture cards and multi-display devices (Fx4, Hx4). This service is available for an additional 10% fee on each card or device. This is an available option on new systems and should be arranged up-front at the time of initial purchase. The policy is valid for the same length of time as the warranty period. The standard warranty period is 3 years.
Extended Warranty
An extended warranty up to 5 years may be purchased, on certain products, at the time of initial purchase. Please contact your Red Solutions’ Account Manager for more information and pricing.
Problem Reporting Procedure If you encounter any problems with your installed Datapath device you should first contact Red Solutions/Datapath Support using the standard methods (Email, Web or Phone) and follow the instructions provided by the support team. This will allow us to determine if the device is at fault or if there is another underlying issue that we can assist you in resolving. If we determine your device is faulty and requires a replacement, Datapath will issue you with an RMA number and check the device's serial number is in the Advanced Replacement Scheme. At this stage we endeavour to ship out your replacement card within 1 working day. Upon receipt of the replacement card you will be expected to return the faulty device, at Datapath’s cost, using the prepaid postage information and packaging provided. The device should be returned within 28 days of receipt or you risk being charged for the replacement*. If any further issues are encountered, you should work with the Datapath support team to progress these. This policy covers only Datapath graphics cards, capture cards and multi-display devices (Fx4, Hx4) as per our standard warranty terms. * Each replacement card will be accompanied by an invoice; these invoices will not be acted upon unless we fail to receive the card back within the 28 days outlined above. Red Solutions also offer the following
Problem Reporting Procedure If you encounter any problems with your installed Datapath device you should first contact Red Solutions/Datapath Support using the standard methods (Email, Web or Phone) and follow the instructions provided by the support team. This will allow us to determine if the device is at fault or if there is another underlying issue that we can assist you in resolving. If we determine your device is faulty and requires a replacement, Datapath will issue you with an RMA number and check the device's serial number is in the Advanced Replacement Scheme. At this stage we endeavour to ship out your replacement card within 1 working day. Upon receipt of the replacement card you will be expected to return the faulty device, at Datapath’s cost, using the prepaid postage information and packaging provided. The device should be returned within 28 days of receipt or you risk being charged for the replacement*. If any further issues are encountered, you should work with the Datapath support team to progress these. This policy covers only Datapath graphics cards, capture cards and multi-display devices (Fx4, Hx4) as per our standard warranty terms. * Each replacement card will be accompanied by an invoice; these invoices will not be acted upon unless we fail to receive the card back within the 28 days outlined above. Red Solutions also offer the following
Support Services:
On-site Commissioning
We offer an on-site Datapath video wall commissioning service. When the screens and controller have been installed our engineer will visit site to ensure that the controller is connected to the screens and input sources required and configured to the clients’ exact requirements.
This service can usually be delivered on the same day as the commissioning, however, it is also available should the client require in-depth training on the features and inputs of the controller at a later date. Please contact your Account Manager for costs and availability.
We recommend an annual support contract to any client using a controller in an environment where the video wall is important to day to day business. The annual support contract provides a next working day response along with an annual service visit. Location within the UK can affect the next day response time. Please consult your Account Manager regarding this prior to purchase.
Downloadable Product Brochures
Interested in Video Wall Solutions?
Call today on +44 (0)1491 576 713 for more information